top of page

LSR-3 from Linseis to measure electrical conductivity and Seebeck coefficient at different temperatures.

LSR-Platform, Linseis `

We can measure the Seebeck-coefficient and the electrical conductivity of various thermoelectric materials. The device is fully automatic and can measure up to a maximum temperature of 1500°C.

This equipment is part of a project that has received funding from the European Research Council (ERC) under the European Research Union's Horizon 2020 research and innovation program.

Light flash analyzer from Netzsch to measure thermal conductivity at different temperatures.

LFA 467, HyperFlash, Netzsch

The light flash apparatus is capable of determining the thermal diffusivity and conductivity of different materials. It can perform measurements across a temperature range of -100°C to 500°C and offers a wide selection of accessories to enhance its versatility.

This equipment is part of a project that has received funding from the European Research Council (ERC) under the European Research Union's Horizon 2020 research and innovation program.

Glovebox to handle air and moisture sensitive materials.

Glove box, Puresmart.

This glove box automatically absorbs water and oxygen molecules, providing an inert atmosphere environment of 1ppm O2 and H2O.

This equipment has been funded by the FWO-EOS CONNECT project.

Laminar flow hood to handle samples in a dust-free environment.

Laminar Air Flow Hood, Safe 2020, Thermo Fisher Scientific

This is a carefully enclosed bench designed to prevent contamination of our research materials, biological samples, or any particle-sensitive device.

This equipment is part of a project that has received funding from the European Research Council (ERC) under the European Research Union's Horizon 2020 research and innovation program.

UV-Vis spectrophotometer to study the optical properties of materials.

Spectrophotometer, UV/VIS UV-1601 PC, Shimadzu

UV/Visible double-beam spectrophotometer is equipped with an optical bench featuring a monochromator and light polarizers.

Climatic chamber to investigate the environmental response of materials and run accelerated tests.

Climate Chamber, Zhong Zhi

The chamber is utilized to examine the impact of humidity, temperature, and light on samples. These chambers enable the creation of either constant or dynamic variations in conditions. This chamber can be used for accelerated testing too.

This equipment is part of a project that has received funding from the European Research Council (ERC) under the European Research Union's Horizon 2020 research and innovation program.

Probe station to test the electrical properties of small samples.

4-probe measurement setup

A customized setup is used to measure the sheet resistance of thin films or substrates by forcing current through two outer probes and reading the voltage across the two inner probes.

This equipment is part of a project that has received funding from the European Research Council (ERC) under the European Research Union's Horizon 2020 research and innovation program.

Brush printing setup to pattern conjugated polymers and modify their morphology.

Inkjet printer Dimatix Fujifilm for functional materials.

Various printers for flexible electronics

bottom of page